VM60
VM60 with CB2P
VM60
is a quiet and powerful actuator up to 6000N thrust, designed for use in a variety of medical and home care applications such as patient hoist and bed.
Main applications: Homecare, medical
Technical Data
Options
Related Products
Technical Data
- Input voltage: 24V DC
- Max. load: 6000N (push) / 4000N (pull)
- Max. speed at no load: 23 mm/sec
- Max. speed at full load: 5.0 mm/sec @ 6000N
- Stroke: 50 ~ 400 mm
- Noise level: ≦53dB
- IP Protection level: IPX4
- Clevis type of metal connectors. Rear connector’s pivot orientation can be chosen
in every 30 degrees.
in every 30 degrees.
- Preset limit switches
- Aluminum outer tube
- Steel extension tube
- Color: Light gray RAL 7035
- Duty cycle: 10%, max. 2 min. continuous operation in 20 min.
- Ambient operation temperature: +5°C ~ +40°C
- Certified: CE Marking, EMC Directive 93/42/EEC
Options
- Positioning signal feedback with Hall effect sensor x 1
- Positioning signal feedback with Hall effect sensor x 2
- Mechanical push only extension tube
- Safety nut (in push direction)
- IP Protection level: IPX6
- QR1 quick release
Only go with motor and spindle code A8 or AC. Certain minimum load is required to push the extension tube back when QR1 is triggered.
- QR2 quick release: To retract actuator quickly by pinching the QR2 grip while emergency
- MR3 manual release: To retract actuator slowly and put down the patient safely by turning the MR3 knob with hand when losing power in the application of patient hoist
Related Products
- Control box: LK2P, LK4P, LK4P-HP, VM6C, LK4P-SY, VM6C-M, LK5P-M